IBM Books

MAS V3.4 Protocol Reference V1

Index

Numerics
A B C D E F G H I J L M N O P Q R S T U V W
Numerics
  • 8209 bridges (2833)
    • A
  • access control rule parameters (3155)
  • addresses (3158)
  • ICMP message type and code (3165)
  • IP protocol number (3159)
  • next hop gateway address selection (3170)
  • packet filter name (3177)
  • precedence and TOS filtering support (3167)
  • security logging options (3175)
  • source address verification (3179)
  • SysLog facility option (3173)
  • TCP connection establishment (SYN) filtering (3163)
  • TCP/UDP source and destination port numbers (3161)
  • type (3156)
  • access controls
  • IP filtering (3150)
  • IP monitoring command (3245)
  • IPX monitoring command (3891)
  • activate
  • CIP monitoring commands (3781)
  • RSVP monitoring command (3531)
  • Adaptive Source Routing Transparent bridge (ASRT) (2663), (2815)
  • basic configuration procedures (2855)
  • bit ordering in STB and SRB bridges (2811)
  • bridge-only management (2821)
  • bridging basics (2639)
  • bridging tunnel (2817)
  • encapsulation and OSPF (2819)
  • configuration matrix (2813)
  • configuring (2812), (2853), (2856)
  • description of (2772)
  • eliminating packet size problems (2809)
  • Ethernet packet format translation (2681)
  • hardware address filtering (2810)
  • MIB support (2823)
  • multiaccess bridge port
  • configuring (2844)
  • description (2840)
  • interoperation with 2218 (2847)
  • multiaccess database (2842)
  • overview (2644)
  • complex bridges (2649)
  • CSMA/CD MAC frames (2659)
  • local bridges (2650)
  • MAC bridge frame formats (2641), (2657)
  • operation and protocol architecture (2653)
  • point-to-point links (2655)
  • remote bridges (2651)
  • simple bridge (2648), (2654)
  • token-ring MAC frames (2661)
  • protocol filtering (2645)
  • source routing bridge (SRB) (2728)
  • operation (2731)
  • source routing frames (2733)
  • spanning tree explore option (2737)
  • spanning tree bridges (2680)
  • spanning tree explore option
  • balancing traffic loads (2742)
  • simulating a network (2740)
  • SR-TB bridging (2777)
  • SR-TB Conversion
  • SR-TB conversion
  • description of (2773)
  • general description (2774)
  • operation (2775), (2776)
  • SRB terminology and concepts
  • bridge instance (2745)
  • bridge number (2747)
  • explorer frames (2749)
  • interface number (2751)
  • overview (2744)
  • route (2753)
  • route discovery (2755)
  • segment number (2757)
  • source routing (2759)
  • TCP/IP host services (2822)
  • terminology and concepts (2686), (2778)
  • aging time (2688)
  • all routes broadcast (2780)
  • all stations broadcast (2782)
  • bridge (2690), (2784)
  • bridge address (2692)
  • bridge hello time (2694)
  • bridge identifier (2696)
  • bridge maximum age (2698)
  • bridge number (2786)
  • bridge priority (2700)
  • designated port (2704)
  • destination bridge (2702)
  • explorer frames (2788)
  • filtering and permanent databases (2706)
  • parallel bridges (2708)
  • path cost (2710)
  • port (2712)
  • port ID (2714)
  • port number (2716)
  • port priority (2718)
  • resolution (2720)
  • ring number (2790)
  • root bridge (2722)
  • root port (2724)
  • route (2792)
  • route designator (2794)
  • route discovery (2796)
  • segment number (2798)
  • single route broadcasting (2800)
  • source routing bridging (2802)
  • spanning tree (2726), (2804)
  • transparent bridging (2806)
  • transparent bridge (STB)
  • network requirements (2670)
  • operation of (2673)
  • overview (2665)
  • routers and transparent bridges (2667)
  • shaping the spanning tree (2678)
  • transparent-source routing compatibility (2808)
  • add
  • ARP over ATM configuration commands (3711)
  • ASRT bridge configuration command (2872)
  • ASRT bridge monitoring command (2938)
  • BAN configuration command (2912)
  • CIP configuration commands (3710)
  • DLSw configuration command (3605)
  • DVMRP configuration command (3482)
  • IP configuration command (3216)
  • IP route filter policy configuration command (3239)
  • IPX configuration command (3841)
  • IPX over ATM configuration command (3713)
  • OSPF configuration command (3334)
  • RSVP configuration command (3523)
  • SNMP configuration command (3548)
  • SNMP monitoring command (3563)
  • TCP/IP host services configuration command (3074)
  • Tunnel configuration command (2923)
  • add entry
  • ARP configuration commands (3679)
  • address entries
  • dynamic (2898), (2946), (2958)
  • free (2899), (2947)
  • permanent (2896), (2944), (2956)
  • registered (2895), (2943), (2955)
  • reserved (2894)
  • static (2897)
  • addresses, entering
  • CIP (3663)
  • advertisement Expansion
  • OSPF monitoring command (3352)
  • agg-policy
  • IP monitoring command (3249)
  • aggregate
  • IP monitoring command (3247)
  • AppleTalk
  • split-horizon routing (3835)
  • APPN
  • interface support (3588)
  • area summary
  • OSPF monitoring command (3354)
  • ARP
  • configuring (3672)
  • displaying statistics (3771)
  • monitoring (3752)
  • translation cache (3643)
  • with AppleTalk threading (2839)
  • with IP threading (2836)
  • ARP configuration commands
  • add entry (3680)
  • change entry (3682)
  • delete entry (3684)
  • disable auto-refresh (3686)
  • enable auto-refresh (3690)
  • list (3692)
  • set (3695)
  • summary of (3677)
  • ARP monitoring commands
  • accessing (3749)
  • clear (3756)
  • dump (3760)
  • hardware (3763)
  • protocols (3766)
  • redundancy-state (3812)
  • statistics (3769)
  • summary of (3751)
  • ARP over ATM
  • add (3714)
  • Classical IP, description (3645)
  • configuration commands, summary (3701)
  • dynamic reconfiguration (3820)
  • effect on ARP table (3708)
  • IPX and ARP over ATM, description (3666)
  • ARP over ATM configuration commands
  • accessing (3674)
  • add (3723)
  • delete (3729)
  • list (3741)
  • reorder (3745)
  • ARP over ATM monitoring commands
  • delete (3786)
  • display (3791)
  • dump (3796)
  • hardware (3801)
  • ping (3806)
  • protocol (3811)
  • statistics (3818)
  • summary of (3772)
  • ARP table
  • CIP (3707)
  • IPX over ATM (3706)
  • AS boundary routing, OSPF (3313)
  • AS-external advertisements
  • OSPF monitoring command (3356)
  • ASRT
  • asrt
  • dynamic reconfiguration (2968)
  • See Adaptive Source Routing Transparent bridge (2640), (2664), (2816)
  • ASRT bridge configuration commands
  • add (2871)
  • and IP tunnel (2907)
  • ASRT bridge configuration command (2903)
  • ban (2879)
  • BAN commands (2909)
  • BAN configuration commands
  • add (2911)
  • delete (2914)
  • list (2917)
  • change (2881)
  • delete (2883)
  • disable (2887)
  • duplicate MAC addresses (2874)
  • enable (2889)
  • functional address to group address mapping (2875)
  • IP tunnel commands (2920)
  • list (2891)
  • NetBIOS filtering commands
  • summary (3011)
  • NetBIOS filtering concepts (2825)
  • NetBIOS filtering configuration commands
  • create (3013)
  • delete (3016)
  • disable (3019)
  • enable (3022)
  • filter-on (3025)
  • list (3028)
  • update (3031)
  • port maps explained (2873)
  • set (2902)
  • summary of (2858)
  • tunnel (2905)
  • tunnel configuration commands
  • add (2922)
  • delete (2925)
  • join (2928)
  • list (2931)
  • ASRT bridge monitoring commands
  • add (2937)
  • ban (2939)
  • BAN monitoring commands
  • discussion (2963)
  • list (2965)
  • cache (2941)
  • delete (2949)
  • flip (2951)
  • list (2953)
  • NetBIOS (2959)
  • NetBIOS filtering monitoring commands
  • list (3036)
  • summary (3034)
  • ASRT bridge NetBIOS feature
  • prompt (2864), (2934)
  • ASRT bridge NetBIOS-filtering feature
  • prompt (2866), (2936)
  • ASRT bridge tunnel feature
  • prompt (2862)
  • ASRT configuration commands
  • list
  • filtering (2893)
  • netbios (2901)
  • assigning IP addresses to bridge network interfaces (3132)
  • ATM addresses
  • CIP (3659)
  • ATM addressing in IPX
  • ESI (3126)
  • selector (3125)
  • attach
  • IPX filter configuration command (3859)
  • auto-refresh
  • disabling (3687)
  • enabling (3688)
    • B
  • balancing SNA and NetBIOS traffic (3590)
  • BAN
  • ASRT bridge configuration command (2880)
  • ASRT bridge monitoring command (2940)
  • DLSw (3607), (3634)
  • dynamic reconfiguration (2971)
  • opening service access points (2852)
  • BAN configuration commands
  • add (2910)
  • delete (2913)
  • list (2916)
  • summary (2908)
  • BAN monitoring Commands
  • BAN monitoring commands
  • accessing (2961)
  • discussion (2962)
  • list (2964)
  • BGP
  • configuring (3396)
  • connections between autonomous systems (3394)
  • default originate policy (3404)
  • defining neighbors (3398)
  • defining policies (3400)
  • enabling (3397)
  • excluding routes (3405)
  • how BGP works (3392)
  • including routes (3403)
  • internal and external neighbors (3399)
  • messages (3395)
  • overview (3391)
  • policy types (3401)
  • receive policy (3406)
  • routes
  • advertising all (3410)
  • blocking specific (3408)
  • importing all (3407)
  • sample policy definitions (3402)
  • send policy (3409)
  • TCP connections (3393)
  • BGP configuration commands (3412), (3418), (3423), (3431), (3436) , (3441)
  • add
  • aggregate (3413)
  • neighbor (3414)
  • no-receive (3415)
  • receive (3416)
  • send (3417)
  • change
  • change originate (3419)
  • change receive (3421)
  • change send (3422)
  • delete
  • aggregate (3424)
  • neighbor (3425)
  • no (3426)
  • originate (3427)
  • receive (3429)
  • send (3430)
  • disable
  • bgp speaker (3432)
  • classless-bgp (3433), (3434)
  • neighbor (3435)
  • enable
  • bgp speaker (3437)
  • classless-bgp (3438)
  • compare-med-from-diff-AS (3439)
  • neighbor (3440)
  • list
  • aggregate (3442)
  • all (3443)
  • bgp speaker (3444)
  • neighbor (3445)
  • no (3446)
  • originate (3447)
  • receive (3449)
  • send (3450)
  • move (3451)
  • policy-to-neighbor (3420), (3428), (3448)
  • set (3452)
  • update (3453)
  • BGP monitoring commands
  • destinations (3455)
  • advertised (3456)
  • received (3457)
  • disable neighbor (3458)
  • dump routing tables (3459)
  • enable neighbor (3462)
  • neighbors (3463)
  • parameter (3464)
  • paths (3465)
  • ping (3466)
  • policy-list (3468)
  • reset neighbor (3470)
  • sizes (3471)
  • traceroute (3472)
  • BGP4 dynamic configuration (3475)
  • BOOTP
  • enabling/disabling (3191)
  • server (3194)
  • Bootstrap monitor
  • forwarding process (3189)
  • Bootstrap protocol (3188)
  • Border Gateway Protocol Version 4- -see BGP4 (3476)
  • Boundary Access Node (BAN)
  • configuring (2850)
  • using (2849)
  • boundary routing, OSPF (3315)
  • bridge
  • MAC frame formats (2642), (2658)
  • point-to-point links (2656)
  • bridge and router (2669)
  • bridge network interface (3134)
  • bridges
  • basic operation (2652)
  • overview (2643)
  • types (2647)
  • versus routers (2646)
  • bridging and routing (3102)
  • overview of RFC 1483 support (3109)
  • RFC 1483 support for IPX routing (3111)
  • support for IPX routing (3121)
  • support of PVCs and SVCs (3120)
  • bridging features (2814)
  • bridging tunnel
  • description of (2818)
  • encapsulation and OSPF (2820)
  • bridging-see also asrt (2969)
    • C
  • cache
  • ASRT bridge monitoring command (2942)
  • IP monitoring command (3251)
  • IPX monitoring command (3893)
  • TCP/IP host services monitoring command (3091)
  • change
  • ARP over ATM configuration commands (3720)
  • ASRT bridge configuration command (2882)
  • CIP configuration commands (3719)
  • DVMRP configuration command (3484)
  • IP configuration command (3218)
  • IPX over ATM configuration command (3722)
  • change entry
  • ARP configuration command (3681)
  • CIP
  • ATM addresses (3658)
  • components (3651)
  • configuration commands, summary (3699)
  • configuring (3670)
  • description (3647)
  • differences from IPX over ATM (3703)
  • effect on ARP table (3705)
  • how to enter addresses (3664)
  • IP addresses (3656)
  • key configuration parameters (3662)
  • logical IP subnets (LIS) (3648)
  • refresh (3654)
  • timeout (3652)
  • virtual channel connection (VCC) (3660)
  • CIP configuration commands
  • accessing (3673)
  • add (3709)
  • change (3718)
  • delete (3724)
  • disable (3730)
  • Enable (3733)
  • list (3736)
  • Reorder (3742)
  • set (3746)
  • CIP monitoring commands
  • activate (3780)
  • delete (3782)
  • display (3787)
  • dump (3792)
  • hardware (3797)
  • ping (3802)
  • protocols (3807)
  • statistics (3814)
  • summary of (3773)
  • Classical IP and ARP over ATM
  • description (3646)
  • clear
  • ARP monitoring commands (3757)
  • IPX circuit-based filter command (3925), (3927)
  • close SAP
  • DLSw configuration command (3609)
  • command summary
  • BGP (3411), (3454)
  • LNM (3044)
  • configuration commands
  • DLSw (2981)
  • LNM (3045)
  • NetBIOS (2982)
  • configuration environment
  • accessing (2986)
  • configuration parameters
  • setting for ARP (3696)
  • configuring
  • Gateway, redundant IP (3206)
  • multiaccess bridge port (2846)
  • redundant IP Gateway (3205)
  • configuring IPX (3836)
  • configuring Virtual Router Redundancy Protocol (3203)
  • counters
  • IP monitoring command (3253)
  • IPX monitoring command (3895)
  • create (3014)
  • IPX filter configuration command (3861)
    • D
  • database
  • permanent (2945), (2957)
  • database summary
  • OSPF monitoring command (3358)
  • default
  • IPX filter configuration command (3863)
  • delete
  • ARP over ATM configuration commands (3726)
  • ARP over ATM monitoring commands (3785)
  • ASRT bridge configuration command (2884)
  • ASRT bridge monitoring command (2950)
  • BAN configuration command (2915)
  • CIP configuration commands (3725)
  • CIP monitoring commands (3783)
  • DLSw configuration command (3611)
  • DVMRP configuration command (3486)
  • IP configuration command (3220)
  • IPX configuration command (3843), (3897)
  • IPX filter configuration command (3865)
  • IPX over ATM configuration command (3728)
  • IPX over ATM monitoring commands (3784)
  • NetBIOS filtering configuration command (3017)
  • OSPF configuration command (3336)
  • RSVP configuration command (3525)
  • SNMP configuration command (3550)
  • SNMP monitoring command (3565)
  • TCP/IP host services configuration command (3076)
  • Tunnel configuration command (2926)
  • delete entry
  • ARP configuration command (3683)
  • demand circuit (3323)
  • detach
  • IPX filter configuration command (3867)
  • disable
  • ARP over ATM configuration commands (3732)
  • ASRT bridge configuration command (2888)
  • CIP configuration commands (3731)
  • DLSw configuration command (3613)
  • DVMRP configuration command (3488)
  • IP configuration command (3222)
  • IPX circuit-based filter command (3929)
  • IPX configuration command (3845), (3899)
  • IPX filter configuration command (3869)
  • LNM configuration command (3049)
  • NetBIOS filtering configuration command (3020)
  • OSPF configuration command (3338)
  • RSVP configuration command (3526)
  • SNMP configuration command (3552), (3554)
  • SNMP monitoring command (3567), (3569)
  • TCP/IP host services configuration command (3078)
  • disable auto-refresh
  • ARP configuration command (3685)
  • display
  • ARP over ATM monitoring commands (3790)
  • CIP monitoring commands (3788)
  • IPX over ATM monitoring commands (3789)
  • Distance Vector Multicast Routing Protocol-see DVMRP (3479)
  • DLSw
  • configuration environment (2987)
  • configuration procedure (3601)
  • configuration requirements (3593)
  • configuring (3600)
  • configuring ASRT for DLSw (3594)
  • configuring IP for DLSw (3595), (3596)
  • configuring NetBIOS for (2989)
  • configuring the SDLC interface (3597)
  • interoperability considerations (3938)
  • interoperability with IBM 6611
  • bridge configuration (3937)
  • IP configuration considerations (3939)
  • monitoring (3630)
  • multicast addresses (3618)
  • overview (3581)
  • TCP interoperability considerations (3940)
  • using (3579)
  • X.25 requirement for QLLC (3598)
  • DLSw configuration commands
  • add (3604)
  • BAN (3606)
  • close SAP (3608)
  • delete (3610)
  • disable (3612)
  • enable (3614)
  • join group (3616)
  • leave group (3619)
  • list (3621)
  • priority (3623)
  • netbios (3624), (3638)
  • open SAP (3626)
  • set (3628)
  • summary of (3602)
  • DLSw dynamic reconfiguration (3642)
  • DLSw monitoring commands
  • add (3633)
  • list
  • dls sessions nb (3635)
  • tcp capabilities (3636)
  • tcp statistics (3637)
  • netbios (3625), (3639)
  • set
  • priority (3640)
  • summary of (3631)
  • dump
  • ARP monitoring commands (3761)
  • ARP over ATM monitoring commands (3795)
  • CIP monitoring commands (3793)
  • IPX monitoring command (3901)
  • IPX over ATM monitoring commands (3794)
  • SCSP monitoring command (3829)
  • TCP/IP host services monitoring command (3089)
  • dump routing tables
  • BGP monitoring command (3460)
  • DVMRP monitoring command (3495)
  • IP monitoring command (3255)
  • OSPF monitoring command (3360)
  • DVMRP
  • monitoring (3477)
  • DVMRP configuration commands
  • add (3481)
  • change (3483)
  • delete (3485)
  • disable (3487)
  • enable (3489)
  • list (3491)
  • summary of (3480)
  • DVMRP dynamic reconfiguration (3509)
  • DVMRP monitoring commands
  • dump routing tables (3494)
  • interface summary (3496)
  • join (3498)
  • leave (3500)
  • mcache (3502)
  • mgroups (3504)
  • summary of (3493)
  • Dynamic Address (3130)
  • dynamic configuration
  • BGP4 (3474)
  • dynamic reconfiguration
  • ARP over ATM (3819)
  • asrt (2967)
  • BAN (2970)
  • DLSw (3641)
  • DVMRP (3508)
  • IP (3287)
  • IPX (3934)
  • LNM (3066)
  • NetBIOS (3008)
  • OSPF (3389)
  • RIP (3289)
  • SNMP (3576)
  • TCP/IP host services (3098)
    • E
  • enable
  • ARP over ATM configuration commands (3735)
  • ASRT bridge configuration command (2890)
  • CIP configuration commands (3734)
  • DLSw configuration command (3615)
  • DVMRP configuration command (3490)
  • IP configuration command (3225)
  • IPX circuit-based filter command (3931)
  • IPX configuration command (3847), (3903)
  • IPX filter configuration command (3871)
  • LNM configuration command (3052)
  • NetBIOS filtering configuration command (3023)
  • OSPF configuration command (3340)
  • RSVP configuration command (3527)
  • TCP/IP host services configuration command (3080)
  • enable auto-refresh
  • ARP configuration command (3689)
  • enabling access control (3151)
  • end system identifier (ESI) (3123)
  • exit (2869)
  • console command (2870)
    • F
  • filter-lists
  • IPX configuration command (3849)
  • IPX monitoring command (3907)
  • filter-on (3026)
  • filters
  • IPX monitoring command (3905)
  • flip
  • ASRT bridge monitoring command (2952)
  • forwarding process (3190)
  • frame command (3851)
  • frame size
  • for NetBIOS (2995)
  • fully meshed network (3114)
  • functional address to group address mapping (2876)
    • G
  • getting help (2867)
  • global access control list, defining (3152)
    • H
  • hardware
  • ARP monitoring commands (3764)
  • ARP over ATM monitoring commands (3800)
  • CIP monitoring commands (3798)
  • IPX over ATM monitoring commands (3799)
  • help
  • console command (2868)
    • I
  • ICMP message type and code (3166)
  • IGMP
  • igmp
  • configuring (3235)
  • IP configuration command (3257)
  • IGP (Interior Gateway Protocol) (3295)
  • interface addresses
  • IP monitoring command (3259)
  • interface summary
  • DVMRP monitoring command (3497)
  • OSPF monitoring command (3362)
  • interface, bridge network (3133)
  • internal IP address (3136)
  • Internet Packet Exchange--see IPX (3936)
  • Inverse ARP
  • configuration commands (3678)
  • configuring (3671)
  • overview (3644)
  • IP (3202)
  • adding UDP Broadcast destinations (3201)
  • addresses, assigning to the bridge network interface (3135)
  • addressing network interfaces (3128)
  • ARP net routing (3147)
  • ARP subnet routing (3146)
  • autonomous systems (3296)
  • BootP/DHCP forwarding process (3187)
  • configuring (3212)
  • disabling BOOTP forwarding (3193)
  • disabling UDP Forwarding (3199)
  • dynamic routing (3138)
  • enabling BOOTP forwarding (3192)
  • enabling UDP Forwarding (3198)
  • interior gateway protocols (3294)
  • monitoring (3241)
  • OSPF and multicast routing (3304)
  • OSPF protocol (3139), (3293)
  • RIP protocol (3141), (3297)
  • route aggregation (3185)
  • RSVP protocol (3511)
  • setting the internal address (3137)
  • sizes command (3276)
  • static routing (3144)
  • IP addresses
  • CIP (3657)
  • IP and SNA integration
  • TN3270E Server (3195)
  • IP basic configuration procedures (3127)
  • using Dynamic Address (3129)
  • using Simple Internet Access (3210)
  • IP configuration commands
  • add (3215)
  • change (3217)
  • delete (3219)
  • disable (3221)
  • enable (3224)
  • igmp (3256)
  • list (3229)
  • move (3231)
  • set (3233)
  • summary of (3214)
  • update (3236)
  • IP dynamic reconfiguration (3288)
  • IP filtering
  • access controls (3149)
  • description (3148)
  • route filtering without policies (3181)
  • using routing policies (3183)
  • IP monitoring commands (3260)
  • access controls (3244)
  • aggr-policy (3248)
  • aggregate (3246)
  • cache (3250)
  • counters (3252)
  • dump routing tables (3254)
  • interface addresses (3258)
  • ping (3262)
  • reset (3264)
  • RIP (3266)
  • RIP-Policy (3268)
  • route (3270)
  • static routes (3274), (3277)
  • summary of (3243)
  • traceroute (3279)
  • udp-forwarding (3281)
  • vrid (3283)
  • vrrp (3285)
  • IP multicast support
  • configuring the router (3208)
  • description (3207)
  • enrolling the router (3209)
  • IP protocol number for filtering (3160)
  • IP protocol RSVP (3518)
  • IP route filter policy configuration commands
  • add (3238)
  • IP route filtering using policies (3184)
  • IP route filtering without policies (3182)
  • IP routing (3105)
  • IP tunnel configuration commands (2919)
  • IP tunnel feature
  • ASRT bridge (2859)
  • IPX
  • addressing (3831)
  • description (3830)
  • monitoring (3887)
  • routing
  • update interval (3832)
  • IPX circuit filters
  • configuring (3833)
  • IPX configuration commands (3850)
  • add (3840)
  • delete (3842), (3896)
  • disable (3844), (3898)
  • enable (3846), (3902)
  • filter-lists (3848)
  • list (3852)
  • move (3854)
  • set (3856)
  • summary of (3839)
  • IPX dynamic reconfiguration (3935)
  • IPX filter configuration commands
  • attach (3858)
  • create (3860)
  • default (3862)
  • delete (3864)
  • detach (3866)
  • disable (3868)
  • enable (3870)
  • list (3872)
  • move (3874)
  • set-cache (3876)
  • update (3878)
  • add (3880)
  • add (IPX) (3884)
  • add (RIP) (3882)
  • add (Router) (3881)
  • add (SAP) (3883)
  • delete (3885)
  • move (3886)
  • IPX monitoring commands
  • access controls (3890)
  • cache (3892)
  • circuit-based filter commands
  • clear (3924), (3926)
  • disable (3928)
  • enable (3930)
  • list (3932)
  • counters (3894)
  • dump routing tables (3900)
  • filter-lists (3906)
  • filters (3904)
  • ipxwan (3908)
  • list (3910)
  • ping (3912)
  • recordroute (3914)
  • reset (3916)
  • sizes (3918)
  • slist (3920)
  • summary of (3888)
  • traceroute (3922)
  • IPX over ATM
  • configuration commands, summary (3700)
  • description (3665)
  • differences from CIP (3702)
  • effect on ARP table (3704)
  • IPX over ATM configuration commands
  • add (3712)
  • change (3721)
  • delete (3727)
  • list (3739)
  • IPX routing (3106), (3122)
  • IPX routing support by RFC 1483 (3113)
  • ipxwan command (3909)
    • J
  • join
  • DVMRP monitoring commands (3499)
  • OSPF configuration command (3342)
  • OSPF monitoring command (3364)
  • Tunnel configuration command (2929)
  • join group
  • DLSw configuration command (3617)
    • L
  • LAN Network Manager
  • See LNM (3038)
  • LAN network manager--see LNM (3068)
  • leave
  • DVMRP monitoring command (3501)
  • OSPF configuration command (3344)
  • OSPF monitoring command (3366)
  • leave group
  • DLSw configuration command (3620)
  • LIS (3650) See also logical IP subnets
  • list (3272)
  • ARP configuration commands (3691)
  • ARP over ATM configuration commands (3738)
  • ASRT bridge configuration command (2892)
  • ASRT bridge monitoring command (2954)
  • BAN configuration command (2918)
  • BAN monitoring command (2966)
  • CIP configuration commands (3737)
  • DLSw configuration command (3622)
  • DVMRP configuration command (3492)
  • IP configuration command (3230)
  • IPX circuit-based filter command (3933)
  • IPX configuration command (3853)
  • IPX filtering configuration command (3873)
  • IPX monitoring command (3911)
  • IPX over ATM configuration command (3740)
  • LNM configuration command (3057)
  • NetBIOS filtering configuration command (3029)
  • NetBIOS filtering monitoring command (3037)
  • OSPF configuration command (3346)
  • RSVP configuration command (3528)
  • RSVP monitoring command (3532)
  • SCSP monitoring command (3822), (3825)
  • SNMP configuration command (3556)
  • SNMP monitoring command (3571)
  • TCP/IP host services configuration command (3082)
  • tunnel configuration command (2932)
  • list devices command (3676)
  • LLC device support (3585)
  • LNM
  • agents and functions (3040)
  • and LLC2 support (3042)
  • configuration commands (3047)
  • configuration restrictions (3041)
  • configuring (3043)
  • overview (3039)
  • LNM configuration commands
  • disable (3048)
  • agent port# (3050)
  • enable (3051)
  • agent port# (3053)
  • configuration (3055)
  • lnm port# (3054)
  • list (3056)
  • password (3058)
  • port port# (3059)
  • set (3064)
  • LNM dynamic reconfiguration (3067)
  • LNM monitoring commands
  • list (3060)
  • bridge (3061)
  • lnm ports (3062)
  • source (3063)
  • logical IP subnets
  • description (3649)
    • M
  • MAC addresses (2904)
  • MAC frames
  • CSMA/CD (2660)
  • token-ring (2662)
  • mcache
  • DVMRP monitoring command (3503)
  • OSPF monitoring command (3368)
  • memory allocation
  • for NetBIOS UI frames (2997)
  • meshed networks (3116)
  • metric, using to determine OSPF costs (3318)
  • mgroups
  • DVMRP monitoring command (3505)
  • OSPF monitoring command (3370)
  • monitoring
  • ARP over ATM monitoring commands (3776)
  • CIP monitoring commands (3774)
  • IPX over ATM monitoring commands (3775)
  • monitoring commands
  • ARP over ATM (3779)
  • CIP (3777)
  • DLSw (2983)
  • IPX over ATM (3778)
  • LNM (3046)
  • NetBIOS (2984)
  • move
  • IP configuration command (3232)
  • IPX configuration command (3855)
  • IPX filter configuration commands (3875)
  • mstats
  • OSPF monitoring command (3372), (3507)
  • multiaccess bridge port
  • configuring (2845)
  • description (2841)
  • interoperation with 2218 (2848)
  • multiaccess database (2843)
  • multicast exploration (3584)
  • multiple spanning trees, problems with (2831)
    • N
  • name lists
  • committing changes (2976)
  • configuring (2974)
  • configuring and monitoring (3000)
  • overview (2973)
  • using (2978)
  • neighbor discovery (3583)
  • neighbor priority (3589)
  • neighbor summary
  • OSPF monitoring command (3374)
  • NetBIOS
  • ASRT bridge (2860)
  • ASRT bridge monitoring command (2960)
  • balancing traffic with SNA (3592)
  • committing name list changes (2977)
  • configuring for DLSw (2988)
  • configuring name lists (2975)
  • frame size (2994)
  • memory allocation
  • for UI frames (2996)
  • name lists overview (2972)
  • opening NetBIOS SAPS for DLSw (2990)
  • session priority (2992)
  • using name lists (2979)
  • NetBIOS commands
  • configuration commands (2998)
  • add (3001)
  • delete (3002)
  • disable (3003)
  • enable (3004)
  • list (3005)
  • set (3006)
  • monitoring
  • summary (2999)
  • NetBIOS dynamic reconfiguration (3009)
  • NetBIOS filtering
  • basic configuration procedures (2980)
  • building a filter (2829)
  • concepts (2826)
  • prompt (2865)
  • simple and complex filters (2830)
  • using bytes (2828)
  • using host-names (2827)
  • NetBIOS filtering configuration commands
  • create (3012)
  • delete (3015)
  • disable (3018)
  • enable (3021)
  • filter-on (3024)
  • list (3027)
  • summary of (3010)
  • update (3030)
  • NetBIOS filtering monitoring commands
  • list (3035)
  • summary of (3033)
  • NetBIOS name caching
  • description (2824)
  • NetBIOS prompt (2863), (2933)
  • NetBIOS-filtering prompt (2935)
  • network circuit
  • monitoring process (3889)
  • network hardware
  • displaying ARP-registered (3765)
  • network interface
  • clearing (3759)
  • next hop gateway address selection (3172)
  • non-volatile configuration memory
  • configuring (2985)
    • O
  • open SAP
  • DLSw configuration command (3627)
  • operational software files (3108)
  • OSPF
  • advantages over RIP (3300)
  • areas (3308)
  • AS boundary routing (3316)
  • configuration parameters (3330)
  • configuring (3292)
  • configuring over ATM (3319)
  • converting from RIP (3329)
  • demand circuit (3322)
  • description of (3299)
  • designated router (3302)
  • enabling (3140), (3305)
  • IP multicast routing (3303)
  • IP multicast routing, sort string (3310)
  • migrating from IBM 6611 (3331)
  • network interface parameters (3309)
  • non-broadcast network interface parameters (3312)
  • parameters for attached areas (3307)
  • poll interval (3326)
  • request hello suppression (3324)
  • RIP comparison (3321)
  • router IDs (3306)
  • routing explained (3301)
  • sort string IP multicast routing (3311)
  • virtual links (3320)
  • OSPF configuration commands
  • add (3333)
  • delete (3335)
  • disable (3337)
  • enable (3339)
  • join (3341)
  • leave (3343)
  • list (3345)
  • set (3347)
  • summary of (3332)
  • OSPF dynamic reconfiguration (3390)
  • OSPF monitoring commands
  • advertisement expansion (3351)
  • area summary (3353)
  • AS-external advertisements (3355)
  • database summary (3357)
  • dump routing tables (3359)
  • interface summary (3361)
  • join (3363)
  • leave (3365)
  • mcache (3367)
  • mgroups (3369)
  • mstats (3371), (3506)
  • neighbor summary (3373)
  • ping (3375)
  • policy (3377)
  • routers (3381)
  • size (3383)
  • statistics (3385)
  • summary of (3350)
  • traceroute (3379)
  • weight (3387)
  • overview of routing (3103)
    • P
  • packet filter name (3178)
  • packet filters
  • defining (3153)
  • setting up access control rules (3154)
  • packet-filter (3261)
  • partially meshed network (3115)
  • permanent virtual circuits (3118)
  • ping
  • ARP over ATM monitoring commands (3805)
  • BGP monitoring command (3467)
  • CIP monitoring commands (3803)
  • IP monitoring command (3263)
  • IPX monitoring command (3913)
  • IPX over ATM monitoring commands (3804)
  • OSPF monitoring command (3376)
  • TCP/IP host services monitoring command (3093)
  • policy
  • OSPF monitoring command (3378)
  • policy-based routing (3171)
  • policy-list
  • BGP monitoring command (3469)
  • poll interval (3327)
  • port map (2900), (2948)
  • precedence and TOS filtering support (3168)
  • protocol
  • RSVP (3519)
  • protocol filters
  • Ethernet Type (2878), (2886)
  • SNAP packets (2877), (2885)
  • protocols
  • Adaptive Source Routing Transparent bridge (ASRT) (2854), (2857)
  • ARP (3667), (3753)
  • ARP monitoring commands (3767)
  • ARP over ATM monitoring commands (3810)
  • CIP monitoring commands (3808)
  • Classical IP and ARP over ATM (3754)
  • classical IP and ARP over ATM (3669)
  • displaying ARP-registered (3768)
  • DVMRP (3478)
  • inverse arp (3668)
  • IP (3213), (3240)
  • IPX (3838)
  • IPX and ARP over ATM (3755)
  • IPX over ATM monitoring commands (3809)
  • LAN and Internetworking
  • IPX (3837)
  • OSPF (3298)
  • OSPF (3291)
  • RIP (3143), (3227)
  • SNMP (3538), (3545), (3560)
  • TCP/IP host services (3070), (3086)
  • PVCs (3117)
    • Q
  • QLLC
  • configuring (3603)
  • device support (3587)
  • monitoring (3632)
  • X.25 requirement for DLSw (3599)
  • QoS in RSVP (3514)
    • R
  • recordroute
  • IPX monitoring commands (3915)
  • redundancy
  • ARP monitoring commands (3813)
  • redundancy configuration command (3715)
  • redundancy configuration commands
  • redundancy (3716)
  • refresh
  • CIP (3655)
  • refresh timer
  • setting (3697)
  • reorder
  • ARP over ATM configuration command (3744)
  • CIP configuration commands (3743)
  • request hello suppression (3325)
  • reset
  • IP monitoring command (3265)
  • IPX monitoring commands (3917)
  • RSVP monitoring command (3533)
  • Resource ReSerVation Protocol (RSVP)
  • configuring and monitoring (3517)
  • RFC 1483 (3101)
  • overview (3110)
  • support for IPX routing (3112)
  • RFCs (3100), (3107)
  • RIP
  • converting to OSPF (3328)
  • enabling (3142)
  • IP monitoring command (3267)
  • OSPF routes (3317)
  • processing (3226)
  • RIP dynamic reconfiguration (3290)
  • RIP-Policy
  • IP monitoring command (3269)
  • RIP/SAP
  • disable/enable (3223)
  • RIP2 (3228)
  • route
  • IP monitoring command (3271)
  • route aggregation (3186)
  • route-table-filtering (3273)
  • router
  • displaying ARP configuration of (3693)
  • displaying redundancy configuration of (3717)
  • routers
  • OSPF monitoring command (3382)
  • TCP/IP host services monitoring command (3097)
  • routing
  • OSPF (3314)
  • routing between bridging and routing interfaces (3131)
  • routing overview (3104)
  • routing tables
  • BGP dump command (3461)
  • RSVP
  • configuration commands (3522)
  • how it works (3512)
  • link types supported (3515)
  • monitoring commands (3530)
  • QoS (3513)
  • sample configuration (3516)
  • using (3510)
  • RSVP configuration commands
  • accessing (3520)
  • add (3524)
  • summary of (3521)
    • S
  • SAPS
  • opening NetBIOS SAPs for DLSw (2991)
  • save
  • SNMP monitoring command (3573)
  • SCSP monitoring command (3821)
  • SCSP monitoring commands
  • dump (3828)
  • list (3824)
  • stat (3826)
  • SDLC
  • device support (3586)
  • security logging options (3176)
  • selector (3124)
  • send
  • RSVP monitoring command (3534)
  • service access points
  • opening (2851)
  • session priority
  • for NetBIOS and DLSw (2993)
  • set
  • ARP configuration commands (3694)
  • ARP over ATM configuration commands (3748)
  • CIP configuration commands (3747)
  • DLSw configuration command (3629)
  • IP configuration command (3234)
  • IPX configuration command (3857)
  • LNM configuration command (3065)
  • OSPF configuration command (3348)
  • RSVP configuration command (3529)
  • SNMP configuration command (3558)
  • TCP/IP host services configuration command (3084)
  • set-cache
  • IPX filter configuration command (3877)
  • show
  • RSVP configuration command (3535)
  • Simple Internet Access (3211)
  • Simple Network Management Protocol--see SNMP (3578)
  • size
  • OSPF monitoring command (3384)
  • sizes
  • IPX monitoring command (3919)
  • slist
  • IPX monitoring command (3921)
  • SNA
  • balancing traffic with NetBIOS (3591)
  • DLSw (3580)
  • SNMP
  • authentication scheme (3541)
  • community (3540)
  • configuring (3537), (3544)
  • MIB support (3542)
  • monitoring (3559)
  • overview (3539)
  • trap messages (3543)
  • SNMP configuration commands
  • add (3547)
  • delete (3549)
  • disable (3551), (3553)
  • list (3555)
  • set (3557)
  • summary of (3546)
  • SNMP dynamic reconfiguration (3577)
  • SNMP monitoring commands
  • add (3562)
  • delete (3564)
  • disable (3566), (3568)
  • list (3570)
  • save (3572)
  • statistics (3574)
  • summary of (3561)
  • source address verification (3180)
  • Source Routing
  • terminology and concepts
  • all routes broadcast (2781)
  • all stations broadcast (2783)
  • bridge (2785)
  • bridge number (2787)
  • explorer frames (2789)
  • ring number (2791)
  • route (2793)
  • route designator (2795)
  • route discovery (2797)
  • segment number (2799)
  • single route broadcasting (2801)
  • source routing bridging (2803)
  • spanning tree (2805)
  • transparent bridging (2807)
  • threading (2834)
  • Source Routing bridge
  • description of (2729)
  • frame types (2734), (2738)
  • operation of (2732)
  • Routing Information Field (2735)
  • spanning tree explorer frame (2736)
  • terminology and concepts (2779)
  • bridge instance (2746)
  • bridge number (2748)
  • explorer frames (2750)
  • interface number (2752)
  • route (2754)
  • route discovery (2756)
  • segment number (2758)
  • source routing (2760)
  • Source Routing Transparent bridge
  • architecture (2764)
  • description of (2761)
  • general description (2762)
  • operation of (2763)
  • terminology (2765)
  • explorer frames (2766)
  • routing information field (RIF) (2767)
  • routing information indicator (RII) (2768)
  • source routing (2769)
  • spanning tree (2770)
  • transparent bridging (2771)
  • Spanning Tree bridge (2672)
  • explore option (2739)
  • Spanning tree network
  • balancing traffic loads (2743)
  • simulation of (2741)
  • spanning tree protocol
  • with 8209 bridges (2832)
  • split-horizon routing
  • for AppleTalk (3834)
  • stat
  • SCSP monitoring command (3827)
  • static routes
  • IP monitoring command (3275), (3278)
  • static routing
  • interaction between static routing and dynamic routing (3145)
  • statistics
  • ARP monitoring commands (3770)
  • ARP over ATM monitoring commands (3816)
  • CIP monitoring commands (3815)
  • IPX over ATM monitoring commands (3817)
  • OSPF monitoring command (3386)
  • SNMP monitoring command (3575)
  • stop-rsvp
  • RSVP monitoring command (3536)
  • SVCs (3119)
  • SysLog facility option (3174)
    • T
  • Talk
  • OPCON command (3242), (3349), (3675), (3750), (3823)
  • TCP
  • interoperability considerations with DLSw (3941)
  • TCP connection establishment (SYN) filtering (3164)
  • TCP connections (3582)
  • TCP/IP host services
  • basic configuration procedures (3071)
  • configuring (3069)
  • monitoring (3085)
  • TCP/IP host services configuration commands
  • add (3073)
  • delete (3075)
  • disable (3077)
  • enable (3079)
  • list (3081)
  • set (3083)
  • summary of (3072)
  • TCP/IP host services dynamic reconfiguration (3099)
  • TCP/IP host services monitoring commands
  • dump (3088)
  • interface (3090)
  • ping (3092)
  • routers (3096)
  • summary of (3087)
  • traceroute (3094)
  • TCP/UDP source and destination port numbers (3162)
  • test (3007)
  • threading
  • AppleTalk end stations (2838)
  • IP end-stations (2835)
  • IPX end stations (2837)
  • timeout
  • CIP (3653)
  • timer
  • refresh (3698)
  • TN3270E Server (3196)
  • TOS filtering support (3169)
  • traceroute
  • BGP monitoring command (3473)
  • IP monitoring command (3280)
  • IPX monitoring commands (3923)
  • OSPF monitoring command (3380)
  • TCP/IP host services monitoring command (3095)
  • translation cache
  • clearing (3758)
  • displaying (3762)
  • Transparent bridge (STB)
  • bridge ID (2676)
  • description of (2666)
  • Ethernet packet format translation (2683)
  • network requirements (2671)
  • on 10/100 Ethernet (2684)
  • on FDDI (2685)
  • operation of (2674)
  • port ID (2677)
  • root bridge ID (2675)
  • routers and bridges (2668)
  • shaping the spanning tree (2679)
  • spanning tree bridges (2682)
  • terminology and concepts (2687)
  • aging time (2689)
  • bridge (2691)
  • bridge address (2693)
  • bridge hello time (2695)
  • bridge identifier (2697)
  • bridge maximum age (2699)
  • bridge priority (2701)
  • designated bridge (2703)
  • designated port (2705)
  • filtering and permanent databases (2707)
  • parallel bridges (2709)
  • path cost (2711)
  • port (2713)
  • port ID (2715)
  • port number (2717)
  • port priority (2719)
  • resolution (2721)
  • root bridge (2723)
  • root port (2725)
  • spanning tree (2727)
  • tunnel
  • ASRT bridge configuration command (2906)
  • tunnel configuration commands
  • add (2921)
  • delete (2924)
  • join (2927)
  • list (2930)
  • tunnel feature
  • prompt (2861)
  • tunneling
  • bridge tunnel (2730)
  • type (3157)
    • U
  • UDP destination
  • adding (3200)
  • UDP forwarding
  • enabling/disabling (3197)
  • udp-forwarding
  • IP monitoring command (3282)
  • update
  • IP configuration command (3237)
  • IPX filter configuration commands (3879)
  • NetBIOS filtering configuration command (3032)
    • V
  • virtual channel connection (VCC)
  • CIP (3661)
  • Virtual Router Redundancy Protocol, configuring (3204)
  • vrid
  • IP monitoring command (3284)
  • vrrp
  • IP monitoring command (3286)
    • W
  • weight
  • OSPF monitoring command (3388)

    • [ Top of Page | Previous Page | Table of Contents | Index ]